? Message us on The Cisco STACK-T1-50CM StackWise Cable is an essential component designed for high-speed data stacking and communication between compatible Cisco switches. This Cisco cable enables seamless connectivity within a stack, ensuring better performance, reduced latency, and increased redundancy. Whether used in enterprise networks, data centers, or high-performance environments, this cable plays a critical role in network scalability and efficiency.
What is the Cisco STACK-T1-50CM Cable?
The STACK-T1-50CM is a 50-centimeter StackWise-1 cable specifically designed for Cisco Catalyst switches. It provides a high-bandwidth, low-latency connection that allows multiple switches to function as a single logical unit. This technology improves overall network performance, simplifies management, and enhances resiliency by ensuring continuous operation even if one switch in the stack fails.
Key Features of Cisco STACK-T1-50CM
The STACK-T1-50CM cable offers several advanced features that make it a valuable component in networking environments.
- High-Speed Data Transfer – The cable is optimized for StackWise technology, delivering high-speed inter-switch communication, ensuring minimal delay and maximum efficiency.
- Seamless Stack Integration – It enables multiple switches to function as a unified system, simplifying network operations and enhancing redundancy.
- Compact & Durable Design – With a 50cm length, the cable is compact and easy to manage, ideal for efficient cable routing in rack-mounted switch stacks.
- Hot-Swappable – This cable supports hot-swapping, meaning network engineers can replace or add cables without disrupting operations.
- Improved Network Resiliency – Ensures failover protection; if one switch in the stack fails, the remaining devices continue operating without interruption.
- High Reliability – Designed by Cisco, the STACK-T1-50CM cable meets stringent quality standards, ensuring long-lasting performance in demanding environments.
Benefits of Using STACK-T1-50CM
The Cisco STACK-T1-50CM offers several advantages for businesses looking to optimize their network infrastructure.
- Enhanced Network Scalability – Allows organizations to expand their network by adding new switches without requiring complex configurations.
- Simplified Management – A stack of switches behaves as a single entity, making network configuration, updates, and troubleshooting easier.
- Cost-Effective Solution – Reduces the need for additional networking equipment by integrating multiple switches into one logical unit.
- Minimized Downtime – Redundancy and failover mechanisms ensure that network traffic is not disrupted in case of hardware failure.
- Better Traffic Distribution – Load balancing and bandwidth optimization ensure smooth data flow across all stacked switches.
Use Cases for STACK-T1-50CM
The STACK-T1-50CM is widely used across various networking environments.
- Enterprise Networks – Ideal for large businesses where multiple switches need to be interconnected for seamless data flow.
- Data Centers – Enhances switch-to-switch connectivity, ensuring high-speed communication in data-intensive applications.
- Educational Institutions – Universities and schools use stacking technology to simplify network management and increase bandwidth.
- Healthcare Facilities – Ensures uninterrupted network availability for medical systems, patient records, and monitoring devices.
- Retail & E-commerce – Supports point-of-sale systems, inventory management, and cloud-based retail applications.
How to Install the Cisco STACK-T1-50CM Stacking Cable
Installing the STACK-T1-50CM cable is straightforward:
- Power Off the Switches – Although StackWise cables support hot-swapping, it’s best practice to power down switches during initial installation.
- Identify the Stack Ports – Locate the StackWise-1 ports on compatible Cisco Catalyst switches.
- Connect the Cable – Insert the cable into the stacking ports of the switches.
- Secure the Connections – Ensure the connectors are firmly attached to prevent loose connections.
- Power On & Verify – Turn on the switches and check the stack configuration using the CLI command:
- Configure the Stack – If needed, assign a master switch and configure the stack using the appropriate Cisco IOS commands.
Troubleshooting Common Issues with STACK-T1-50CM
Here are some common issues and solutions when using the STACK-T1-50CM cable:
- Cable Not Recognized – Ensure that the cable is properly seated in the StackWise-1 ports and that the switches are compatible.
- Stack Not Forming – Run the
show switchcommand to verify stack members and re-seat the cable if necessary. - Intermittent Connection Drops – Inspect for physical damage or try a different stacking port.
- Slow Performance – Check if the stacking bandwidth is being utilized efficiently. A software update may also be required.
Compatible Cisco switches
The Cisco STACK-T1-50CM StackWise Cable is primarily designed for high-speed stacking of compatible Cisco switches. Based on the available information, this cable is compatible with the following switch series:
- Cisco Catalyst 3850 Series: Utilizes StackWise-480 technology, allowing up to nine switches to operate as a single unit.
- Cisco Catalyst 9300 Series: Employs StackWise-480 technology, supporting up to eight switches in a stack.
- Cisco Catalyst 9300X Series: Enhanced version of the 9300 series with advanced features.
It’s important to note that while the STACK-T1-50CM cable is compatible with these series, specific models within each series may have unique requirements or limitations. Therefore, it’s recommended to consult the official Cisco documentation or contact a Cisco representative to confirm compatibility with your specific switch model.
Alternative StackWise Cables from Cisco
If the 50cm length is not suitable for your setup, Cisco offers alternative StackWise cables:
| Model | Length | Compatibility |
|---|---|---|
| STACK-T1-1M | 1m | For larger switch stacks |
| STACK-T1-3M | 3m | For distant switch stacking |
| STACK-T2-50CM | 50cm | Supports StackWise-480 technology |
These options provide flexibility for different network layouts.
Technical Specifications of Cisco STACK-T1-50CM
Here’s a detailed technical breakdown of the STACK-T1-50CM cable:
| Specification | Details |
|---|---|
| Product Name | Cisco STACK-T1-50CM StackWise Cable |
| Length | 50 cm (0.5 meters) |
| Technology | StackWise-1 |
| Compatibility | Cisco Catalyst 9200, 9300 Series Switches |
| Connector Type | StackWise Proprietary |
| Bandwidth | High-Speed (Up to 160 Gbps, depending on the switch model) |
| Hot-Swappable | Yes |
| Durability | High-quality shielding for long-term reliability |
| Use Case | Interconnecting multiple Cisco switches in a stack |
| Manufacturer | Cisco Systems, Inc. |
Final Thoughts
The Cisco STACK-T1-50CM StackWise Cable is a critical networking component for businesses looking to create a scalable and resilient network infrastructure. With its high-speed data transfer, robust reliability, and seamless integration with Cisco Catalyst switches, it enhances network efficiency and minimizes downtime. Whether for enterprise, data center, or educational institutions, this StackWise cable is an essential tool for optimizing switch stacking.
By leveraging this cable, IT teams can enjoy simplified management, increased redundancy, and improved performance, making it a smart investment for any Cisco-powered network.
Reviews
There are no reviews yet.