One of the stackable Gigabit Ethernet switches in the Cisco Catalyst 2960-X family is the Cisco WS-C2960X-24TS-L. Networks in small- to medium-sized enterprises frequently employ it.
Cisco WS-C2960X-24TS-L Network Switch
These are the salient features of the Cisco 2960X 24TSL:
1. Ports: The model number “24TS” denotes the presence of 24 ports. All of the ports in this instance are 10/100/1000 Ethernet ports.
2. Layer 2 Switching: The WS-C2960X-24TS-L is able to route traffic based on MAC addresses because it functions at Layer 2 of the OSI model.
3. LAN Base Software OF WS-C2960X-24TS-L: The model number’s “L” designates that it includes LAN Base software, which offers fundamental Layer 2 functionality.
4. Stackable: You can link numerous switches to work as a single unit by stacking them together. This makes scaling possible and administration simpler.
5. Power over Ethernet (PoE): Power over Ethernet is not supported by this switch model. You can take into consideration alternative PoE-capable Catalyst 2960-X models if that’s what you need.
6. Security Features: To defend the network against different types of assaults, it provides a number of security features like IP Source Guard, Dynamic ARP Inspection (DAI), and DHCP snooping.
7. Quality of Service (QoS): This 2960 switch has QoS characteristics that allow it to give priority to specific kinds of traffic, making sure that bandwidth is needed for important applications.
8. Manageability: There are several ways to manage it, such as via a web interface, SNMP (Simple Network Management Protocol), or a command-line interface (CLI).
In general, small to medium-sized networks that need basic Layer 2 capabilities with some additional features for security and manageability will find the Cisco WS-C2960X-24TS-L to be a dependable and adaptable switch.
Cisco WS-C2960X-24TS-L Network Switch full Specs
model | WS-C2960X-24TS-L |
Ports | 24 x 10/100/1000 Ethernet ports |
Software | LAN Base |
Layer 3 Functionality | no |
Case | Medium-sized |
In the context of Cisco switches, Lan Lite and Lan base probably refer to various versions or configurations of LAN switches. LAN lit may refer to the Cisco switch feature set designed for small and medium-sized businesses, known as LAN Lite. It offers essential Layer 2 functionalities like VLANs, Link Aggregation, and Spanning Tree Protocol. On the other hand, Lan base may refer to LAN Base, a more advanced feature set found in Cisco switches.
Beyond what LAN Lite offers, LAN Base has extra features like Layer 3 capabilities , Quality of Service, and more sophisticated security measures.
In conclusion, the primary distinction between LAN Base and LAN Lite is the range of features and functionalities that each offers; LAN Base offers more sophisticated features than LAN Lite.
jaci –
I buy again and again this switches