WS-C2960S-24PS-L Cisco Network Switch

daThe Cisco WS-C2960S-24PS-L is another model from the Cisco Catalyst 2960-S series of switches.

Cisco WS-C2960S-24PS-L Network Switch

Here are some key details about the WS-C2960S-24PS-L switch:

1. Configuration of Ports: Gigabit Ethernet (10/100/1000 Mbps) connections can be made via any of the switch’s 24 Ethernet ports. Power over Ethernet (PoE) is supported by all 24 ports on this model, so you can power compatible devices like IP phones, wireless access points, and security cameras straight from the Ethernet cables.
2. PoE Power Capacity: The PoE power capacity of the WS-C2960S-24PS-L is 370 watts. It can supply linked PoE devices with up to 15.4 watts of power per port at the same time. The PoE (802.3af) standard is supported by this model.
3. LAN Base Software: LAN Base software from Cisco, which provides a number of Layer 2 and fundamental Layer 3 switching functions, is installed on the switch. Features such as Quality of Service (QoS), Routing Information Protocol (RIP), Link Aggregation Control Protocol (LACP), Spanning Tree Protocol (STP), and VLANs are supported.
4. FlexStack Technology: Cisco’s FlexStack technology is supported by the WS-C2960S-24PS-L, enabling you to stack up to four switches with a single configuration. This feature increases scalability and streamlines management.
5. Security Features: The switch has a number of security features, including port security, DHCP snooping, and Access Control Lists (ACLs), to assist safeguard the network.
   Network Management: It is compatible with several management solutions, such as Simple Network Management Protocol (SNMP), Cisco Prime Infrastructure, and Cisco Network Assistant. Administrators can effectively monitor and configure the switch with the help of these tools.
6. Energy Efficiency: The WS-C2960S-24PS-L incorporates Cisco’s Energy Efficient Ethernet (EEE) standard, reducing power consumption during periods of low network activity and contributing to lower operating costs.
7. Layer 2 and Layer 3 Switching: The switch provides both basic routing functionality and advanced switching at both Layer 2 and Layer 3 of the OSI model.

Cisco 2960S 24PSL Key features

Small to medium-sized networks in need of Gigabit Ethernet connectivity, Power over Ethernet capabilities, and fundamental Layer 3 routing functions will benefit from the Cisco WS-C2960S-24PS-L. To meet the demands of contemporary network settings, it provides a blend of sophisticated functionality, security, and management choices.

• Uplink Interfaces: 4 SFP uplink interfaces
• PoE/PoE+ Support: Yes (PoE+)
• Maximum PoE Power Budget: 370W
• Switching Capacity: 176 Gbps
• Forwarding Rate: 41.7 Mpps
• RAM: 128 MB
• Flash Memory: 64 MB
• Dimensions (H x W x D): 1.73 x 17.5 x 11.8 inches (4.4 x 44.5 x 30.0 cm)
• Weight: 9.8 pounds (4.5 kg)

This switch has Layer 2 switching, VLAN support, Quality of Service (QoS), and basic security features. It is intended for small- to medium-sized enterprise LAN access deployments. With the support of Power over Ethernet (PoE+), it can draw power straight from the switch ports to power devices like IP phones, wireless access points, and security cameras.

Cisco WS-C2960S-24PS-L Data Sheet table

Here’s a breakdown of the key differences:

1. Series: The WS-C2960S-24PS-L belongs to the Cisco Catalyst 2960-S Series, while the WS-C2960X-24PS-L belongs to the Cisco Catalyst 2960-X Series.
2. Switching Capacity and Forwarding Rate: In comparison to the WS-C2960S-24PS-L, the WS-C2960X-24PS-L has a lower switching capacity and forwarding rate. In general, the Catalyst 2960X series provides better performance than the 2960S series; nevertheless, in this instance, the 2960X series unit in question has lower performance requirements.
3. RAM and Flash Memory: The WS-C2960X-24PS-L has higher RAM and flash memory capacity compared to the WS-C2960S-24PS-L.
4. Dimensions and Weight: The dimensions and weight of both switches are quite similar, with slight variations.

In general, the Catalyst 2960X series offers more sophisticated features and generally higher performance than the Catalyst 2960S series, even if both switches have equal physical attributes and PoE capabilities. The WS-C2960S-24PS-L, however, outperforms the WS-C2960X-24PS-L in this particular comparison in terms of switching capacity and forwarding rate.