The HPE 400GB NVMe PCIe 2.5inch SSD Server Hard Drive ( part number 764891-001 ), is a high performance solid state drive for HPE servers. This solid state memory improves the communication between the server and the disk by using the NVMe PCIe interface and increases system performance. In this article, we will review and criticize this SSD hard server.
SSD or HDD?
The main differences between HDDs (Hard Disk Drives) and SSDs (Solid State Drives) lie in their technology, performance, reliability, and physical characteristics:
- Technology:
- HDD: HDDs use spinning magnetic disks (platters) coated with magnetic material and read/write heads that move over the platters to access data.
- SSD: SSDs use flash memory chips (NAND flash) to store data electronically. They have no moving parts.
- Performance:
- HDD: Typically slower in data access speeds and latency due to mechanical components and spinning disks. They are measured in RPM (revolutions per minute).
- SSD: Much faster in data access speeds and latency because there are no moving parts. Data access is almost instantaneous.
- Reliability:
- HDD: More prone to mechanical failure and data loss due to moving parts and wear over time. Susceptible to shocks and vibrations.
- SSD: Generally more reliable and durable because they have no moving parts. Less susceptible to shocks and vibrations.
- Noise and Power Consumption:
- HDD: Audible mechanical noise due to spinning disks and moving parts. Consumes more power compared to SSDs.
- SSD: Completely silent operation as there are no moving parts. Consumes less power, leading to lower energy usage and heat generation.
- Capacity and Cost:
- HDD: Typically offers larger storage capacities at lower costs per gigabyte compared to SSDs.
- SSD: Generally has higher cost per gigabyte and offers smaller storage capacities in comparison to HDDs, although prices have been decreasing.
- Form Factor:
- HDD: Usually available in 3.5-inch and 2.5-inch form factors for desktops and laptops respectively, and larger for enterprise servers.
- SSD: Available in various form factors including 2.5-inch, M.2, and PCIe add-in cards. Compact and lightweight.
In conclusion, HDDs are conventional storage systems that have mechanical read/write heads and spinning disks. They are more expensive but have slower performance and are more prone to physical damage. However, SSDs are more expensive per gigabyte and usually have smaller capacity than SSDs. SSDs, on the other hand, use flash memory for faster speed, increased reliability, lower power consumption, and silent operation. The decision between HDD and SSD is influenced by a number of variables, including budget, performance needs, and particular use cases (such as long-term storage in desktop computers or high-speed data access in servers).
HPE 400GB NVMe PCIe 2.5inch SSD
For use in business settings, the HPE 400GB NVMe PCIe 2.5-inch SSD provides high-performance storage options. It maximizes workload performance by ensuring extremely high data transfer speeds and minimal latency through its NVMe interface. It is made to work with HPE ProLiant servers and blends in easily with current infrastructures to improve dependability and efficiency.
The SSD ensures data integrity and longevity with its strong endurance levels and advanced data protection methods. It is perfect for demanding applications like virtualization, databases, and analytics since it can easily handle demanding storage requirements and support scalable deployments.
HPE 400GB NVMe PCIe SSD Features
- Capacity: 400GB storage capacity.
- Interface: NVMe PCIe interface for high-speed data transfer.
- Form Factor: 2.5-inch form factor, suitable for various server configurations.
- Performance: Low latency and high throughput for demanding workloads.
- Compatibility: Designed for HPE ProLiant servers, ensuring seamless integration.
- Reliability: Advanced data protection and endurance for enhanced reliability.
- Scalability: Supports scalable deployments in enterprise environments.
- Applications: Ideal for virtualization, databases, and data analytics.
- Management: Efficient management capabilities for optimized performance.
Compatibility with a variety of HPE ProLiant Gen10 servers and storage systems that support NVMe PCIe SSDs is the HPE 400GB NVMe PCIe 2.5-inch SSD. With its smooth integration into these systems, it provides high-performance storage capabilities appropriate for business settings needing dependable and quick access to data.
HPE 400GB NVMe PCIe SSD Specifications
Specification | Description |
---|---|
Capacity | 400GB |
Interface | NVMe PCIe |
Form Factor | 2.5-inch |
Sequential Read Speed | Up to 2050 MB/s |
Sequential Write Speed | Up to 1290 MB/s |
Random Read IOPS | Up to 265,000 |
Random Write IOPS | Up to 76,000 |
Endurance (DWPD) | 3.0 |
MTBF (Mean Time Between Failures) | 2 million hours |
Power Consumption (Active/Idle) | 9.0W / 5.5W |
Interface Speed | PCIe 3.0 x4 |
Operating Temperature | 0°C to 70°C (32°F to 158°F) |
Storage Temperature | -40°C to 85°C (-40°F to 185°F) |
Shock and Vibration | Operating: 100G, 6 ms half-sine<br>Non-operating: 1000G, 0.5 ms half-sine |
The HPE 400GB NVMe PCIe 2.5-inch SSD’s primary features are outlined in this table, along with pertinent details including capacity, interface, performance metrics, endurance, and environmental factors.
HPE 400GB NVMe PCIe 2.5-inch SSD VS 2.4TB 10K 12G SAS SFF HDD
Specification | HPE 400GB NVMe PCIe 2.5-inch SSD | HPE 2.4TB 10K 12G SAS SFF HDD |
---|---|---|
Technology | NVMe PCIe | SAS |
Form Factor | 2.5-inch | 2.5-inch |
Capacity | 400GB | 2.4TB |
Interface Speed | PCIe | 12G SAS |
Sequential Read Speed | Up to 2050 MB/s | Up to 240 MB/s |
Sequential Write Speed | Up to 1290 MB/s | Up to 240 MB/s |
Random Read IOPS | Up to 265,000 | 220 IOPS |
Random Write IOPS | Up to 76,000 | 220 IOPS |
Endurance (DWPD) | 3.0 | Not specified |
Mean Time Between Failures (MTBF) | 2 million hours | 2 million hours |
Power Consumption (Active/Idle) | 9.0W / 5.5W | 6.3W / 3.0W |
Operating Temperature | 0°C to 70°C | 10°C to 35°C |
Storage Temperature | -40°C to 85°C | -30°C to 60°C |
Shock and Vibration | Operating: 100G, 6 ms half-sine, Non-operating: 1000G, 0.5 ms half-sine | Operating: 1.0G, 2-500Hz ,Non-operating: 5.0G, 2-200Hz |
This table compares the features of the HPE 2.4TB 10K 12G SAS SFF HDD and the HPE 400GB NVMe PCIe 2.5-inch SSD in terms of technology, capacity, performance, endurance, reliability, power consumption, and environmental aspects.
Reviews
There are no reviews yet.