? Message us on In today’s networking environments, reliability and simplicity are key—especially when deploying devices like wireless access points, cameras, and CPE units in remote or hard-to-reach locations. Power over Ethernet (PoE) technology has revolutionized the way we deliver both power and data using a single cable. The Ubiquiti POE-24-12W-G POE Injector plays a crucial role in this transformation, offering dependable, efficient power delivery for a wide range of Ubiquiti devices.
Whether you’re setting up a point-to-point link on a rooftop or powering a UniFi access point in a hallway, this compact yet powerful injector provides exactly what’s needed: steady 24V passive PoE with Gigabit throughput. It’s no surprise that the Ubiquiti POE-24-12W-G POE Injector has become a standard companion in Ubiquiti installations around the world.
Deep Dive: What Is the Ubiquiti POE-24-12W-G POE Injector?
The Ubiquiti POE-24-12W-G is a high-performance Gigabit PoE injector designed to deliver 24V, 0.5A power (totaling 12W) to compatible Ubiquiti devices. It’s specifically engineered for applications where active PoE is not supported or needed, yet you still want to maintain Gigabit speed across the Ethernet link. With its compact form factor, easy plug-and-play design, and robust internal components, this injector ensures safe and efficient operation in demanding environments.
In terms of physical design, the POE-24-12W-G is minimalistic but sturdy. The casing is made from durable plastic with internal heat dissipation mechanisms to prevent thermal stress. On the front panel, you’ll find two RJ45 Gigabit Ethernet ports—one for data input and one for data + power output—clearly labeled to avoid confusion. An LED indicator confirms when power is being supplied, allowing for easy monitoring during installation or troubleshooting.
This PoE injector complies with IEC 60950-1 standards and includes surge protection and ESD (electrostatic discharge) protection to ensure long-term reliability. It’s built not just to perform, but to last—even in less-than-ideal power environments.
Where It Shines: Practical Use Cases
The Ubiquiti POE-24-12W-G POE Injector is a perfect match for many Ubiquiti devices, including:
- NanoStation M2/M5
- airMAX CPE devices
- UniFi AP-AC-Lite (when using 24V passive PoE instead of 802.3af)
- Ubiquiti cameras (airCam)
- LBE and Loco series
Its usage is widespread in both residential and commercial networks. In multi-floor buildings, the injector allows deployment of ceiling-mounted APs without needing additional power outlets. In outdoor setups, it reduces the number of components and simplifies cabling.
Ports and Connectivity
This injector features:
1x Gigabit Data Input Port (LAN): This port connects to your network switch, router, or firewall, transmitting data toward the endpoint.
1x Gigabit Data + Power Output Port (PoE): This port connects to the powered device (e.g., access point or camera) via a Cat5e/6 cable, transmitting both power and data.
Both ports support full 10/100/1000 Mbps speeds, ensuring that the injector doesn’t become a network bottleneck, especially in high-throughput deployments.
Build Quality and Longevity
The Ubiquiti POE-24-12W-G POE Injector is known for its robust and fail-safe design. Despite being lightweight, it features solid internal soldering, quality capacitors, and strong surge protection mechanisms. It’s ideal for long-term usage in both indoor and semi-protected outdoor environments.
Its passive PoE system means there are fewer negotiation mechanisms to fail compared to 802.3af/at alternatives. While this means you need to ensure compatibility manually, it also guarantees a more direct and efficient power supply path—ideal for devices specifically built to work with 24V passive power.
Don’t Mix Passive with 802.3af PoE
One common mistake in mixed-device environments is accidentally using passive PoE on devices that expect 802.3af or 802.3at. Unlike active PoE standards, the Ubiquiti POE-24-12W-G POE Injector immediately sends power without negotiating. Always double-check voltage compatibility before plugging in. A mismatch can damage equipment.
Ideal Cable Lengths for Best Performance
While the injector can technically deliver power over distances of up to 100 meters, optimal performance—especially in 24V passive setups—is achieved with cable lengths under 60 meters. This minimizes voltage drop and ensures devices boot up without hiccups, particularly under cold-start conditions.
Comparison with Similar Ubiquiti POE Injectors
| Model | Output Voltage | Max Power | Data Rate | Key Use Case |
|---|---|---|---|---|
| POE-24-12W-G | 24V @ 0.5A | 12W | Gigabit | airMAX, UniFi Lite APs |
| POE-24-24W-G | 24V @ 1A | 24W | Gigabit | Higher power Ubiquiti radios |
| POE-48-24W-G | 48V @ 0.5A | 24W | Gigabit | UniFi devices with 48V support |
| POE-50-60W | 50V @ 1.2A | 60W | Gigabit | ToughSwitch, EdgeSwitch, heavy APs |
The POE-24-12W-G stands out for its balance of power and compatibility. It’s more affordable and compact than higher-output models, making it a favorite in cost-conscious or small-scale deployments.
Technical Specifications: Ubiquiti POE-24-12W-G POE Injector
| Specification | Details |
|---|---|
| Product Name | Ubiquiti POE-24-12W-G |
| Input Voltage | 90–260VAC @ 47–63Hz |
| Output Voltage | 24V DC |
| Output Current | 0.5A |
| Max Power Output | 12W |
| Data Speed | 10/100/1000 Mbps |
| Output Connector | 2x RJ45 Gigabit Ethernet Ports |
| ESD/Surge Protection | ±24kV Air / ±12kV Contact |
| Operating Temperature | 0°C to 40°C |
| Dimensions | 88 x 60 x 33 mm |
| Weight | 99 g |
| Certifications | CE, FCC, IC |
FAQ: Ubiquiti POE-24-12W-G POE Injector
- Can I use this injector with non-Ubiquiti devices?
Only if they support 24V passive PoE. Otherwise, it may damage the device. - Does it support 802.3af or 802.3at?
No, this injector only supports 24V passive PoE. - Is it safe to use outdoors?
Only if placed inside a weatherproof enclosure. - Can I use it with a PoE switch?
No need if the switch already provides the correct PoE; don’t double-power devices. - What kind of cable should I use?
Use Cat5e or Cat6 for optimal power and data transfer. - How do I know if my device supports passive PoE?
Refer to the device’s datasheet; Ubiquiti often marks passive PoE clearly. - Is there a fuse or internal protection?
Yes, it includes short circuit and surge protection. - Can I mount it on a wall?
It’s designed for desktop use but can be mounted using third-party brackets. - Is it hot-swappable?
No. Always disconnect power before plugging or unplugging devices. - What happens if I plug in the wrong device?
If the device doesn’t support 24V passive PoE, it could get damaged.
Final Thoughts: Is the Ubiquiti POE-24-12W-G Right for You?
The Ubiquiti POE-24-12W-G POE Injector delivers what it promises: reliable, efficient power for a wide range of Ubiquiti networking devices. It shines in simplicity, build quality, and affordability—making it a staple tool in the toolkit of installers, network administrators, and IT professionals.
If you’re looking for a compact, durable, and plug-and-play injector for 24V passive PoE setups, this model is hard to beat. And with full Gigabit throughput, it ensures your powered devices receive not just energy, but the speed they need to perform optimally.
Whether you’re setting up a single UniFi access point or a full wireless link using airMAX radios, the Ubiquiti POE-24-12W-G POE Injector is a solid choice that just works.
Reviews
There are no reviews yet.